The iCarsoft VAWSII is a professional fault diagnosis tool designed specifically for VW/AUDI/SEAT/SKODA vehicles. The VAWSII is an easy to use, stand alone unit that will have you scanning your vehicle within minutes. Simply, plug it into the OBD II port and the device will boot up with step-by-step instructions. This scanner has a large, easy to read 4 inch color display accompanied by a user friendly interface that requires no additional software. As an added bonus, the scanner is equipped with full OBDII capabilities that allows you to scan all engine readings and related trouble codes on other OBD2 compliant vehicles
This tool expands on the functionality of the first generation iCarsoft i908. Added features for the iCarsoft VAWSII include the following:
Oil Service Reset Function
The iCarsoft 2nd Generation Diagnostic Tools allow you to reset Oil Service Lights in a click of a button on supported vehicles. On vehicles where a manual reset is required, the tool will guide you through the full process step-by-step.
EPB Reset Function
Brake Pad / Shoe changes on vehicles equipped with EPB's (Electronic Parking Brakes) MUST be carried out using a Diagnostic Tool to correctly re-calibrate. The iCarsoft 2nd Generation Tools offer you that capability on supported models. De-activate to Service Position - Replace - Re-activate.
ECTS Reset Function
After cleaning or replacing the Electronic Throttle Body (ECTS), adaptation must be carried out (also the case if the negative terminal of the battery has been disconnected or when the Engine Control Unit has been replaced). The iCarsoft 2nd Generation Tools will perform Electronic Throttle Body adaptations on supported vehicles.
SAS Reset Function
The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned. The signal is mainly used by the ABS System as part of it's stability control function but also by other systems such as ride level control and adaptive lighting. A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly.
If the Steering Angle Sensor (SAS) needs to be changed, many vehicle's require the new sensor to be calibrated. The iCarsoft 2nd Generation Tool will allow you to carry out steering angle re-calibration on supported models.
DPF Regeneration or Replacement
Carry out a forced Diesel Particulate Filter (DPF) Regeneration on supported vehicles - this MUST be done by trained personnel. Required when the DPF filter blockage reaches levels where passive or active regeneration is unable to burn off the excess soot. The iCarsoft 2nd Generation Tool is also capable of adapting a new DPF Filter where supported.
Main Functions Include
-Read and clear diagnostic trouble codes from numerous vehicle systems - ABS, Airbag, Engine, Transmission, Air Suspension, Instrument cluster, etc.
-Read Live Data Stream Info
-Fault-Tracing for malfunction indicator lights including check engine, ABS, SRS airbag, etc.
-Vehicle and ECU information
-Datastream Graph Display
-View Freeze Frame Data
A4/S4 B8 Facelift
A5/S5 Cab Facelift
A6 C5 (includes Allroad)
A6 C6 (includes Allroad)
A6 C6 (includes Allroad) Facelift
A6 C7 Facelift (includes Allroad)
A8 D3 Facelift
A8 D4 Facelift
Golf Variant VII
New Beetle Facelift
New Beetle Cab
New Beetle Cab Facelift
Beetle Cab Facelift
Passat B6 Facelift
Passat NMS Facelift
Passat CC Facelift
VAWSII Scan Tool with removable main cable
USB Cable (for connecting to computer for updates)
Nylon Carry Case
TF Card Reader
Ask a question
Write a reviewName:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: