Stahlcar Ford & Mazda Diagnostic Range
Stable Wired FORScan Connection with Automatic HS/MS-CAN Switching
The Vgate vLinker FS USB is a high-speed OBD2 interface designed for FORScan use on Ford, Mazda, Lincoln and Mercury vehicles. It connects directly to a Windows computer by USB and automatically switches between supported CAN networks without a manual HS/MS-CAN toggle.
USB WiredStable PC Connection
FORScanFord & Mazda Focused
HS/MS-CANAutomatic Switching
FEPS 18VSupported Programming Voltage
The vLinker FS is aimed at users who want more than a basic generic OBD2 adapter. FORScan can use it to access supported manufacturer-specific modules and functions across Ford-family vehicles, while the wired connection is well suited to longer diagnostic sessions and data logging.
Unlike cheaper adapters that use a physical HS/MS-CAN switch, the vLinker FS changes networks electronically. This makes it easier for FORScan to move between supported modules without stopping to change a manual toggle.
Best Suited For
Ford and Mazda owners, enthusiasts and workshops using FORScan for Windows and wanting a fast, stable wired interface for diagnostics, live data, service functions and supported configuration work.
FORScan Compatibility
The vLinker FS USB is designed specifically around FORScan and Ford-family diagnostic protocols. FORScan currently supports the vLinker FS USB for Windows use.
FORScan is third-party software and is not supplied or developed by Stahlcar. Exact diagnostics, service procedures, configuration and programming functions depend on the vehicle, control module and FORScan software support.
Key Features
- Designed for FORScan on Ford, Mazda, Lincoln and Mercury vehicles
- Automatic electronic HS-CAN and MS-CAN switching
- Wired USB connection for stable communication
- Supports FEPS 18V programming voltage where required by supported procedures
- Transfer rate up to 3 Mbps as specified by Vgate
- Supports OBD request frames up to 4128 bytes
- 8192-byte serial buffer
- Firmware updateable
- USB 2.0 and USB 3.0 support listed by Vgate
Vehicle Compatibility
Vgate designed the vLinker FS primarily for Ford, Mazda, Lincoln and Mercury vehicles. Exact module access varies by model, year, market and fitted control systems.
The interface also supports standard OBD2 communication where compatible software allows it, but this listing is primarily intended for FORScan use.
Configuration and Programming Require Care
FORScan can offer configuration, service and programming functions on supported vehicles. These functions are vehicle-dependent and can change module settings. Back up original configuration data and follow the correct FORScan procedure before making changes.
Firmware Note for Older Vehicles
Vgate recommends using current vLinker FS firmware when working with vehicles from 2005 or earlier. Firmware and driver downloads are available from Vgate.
What’s in the Box
- Vgate vLinker FS USB OBD2 interface
- User manual
Is This the Right Adapter for You?
Choose the vLinker FS USB if you use FORScan on a Windows laptop and want a wired interface with automatic HS/MS-CAN switching for supported Ford and Mazda diagnostics.
If you only need basic engine fault-code reading, a simpler OBD2 tool will usually be enough. FORScan software and any applicable licence are separate from this adapter.
